Home Power Generation Units and Their Impact

Oct 16, 2013 Generators

Home Power Generation Units and their impact

It absolutely was under a century ago that electrical power was a convenience as opposed to a necessity. Homes which in fact had electricity enjoyed several lights and in many cases fewer receptacles for plugging appliances into. Electrical codes were few and those that existed were not widely enforced. Gradually, some great benefits of electrical power were realized and also by the 1930s, most homes in US cities had electricity, but rural farms and homes would not.
The Rural Electrification Act of 1935 was passed with the aim of providing electrical power to any homes in the USA. Groups of electricians worked in conjunction with line crews to install electrical power on farms. Most homes were provided 60 amp service that included a range circuit, a kitchen circuit, and several lighting circuits.

Reliance upon Electricity

Not surprisingly, luxury hotels and manufacturing facilities were the first to embrace electricity. Hotels installed electric lighting and operated their own generators. Likewise, industry switched from steam driven equipment to electrical motors and in addition used electrical generators to deliver their own electrical power.
Because capability to produce electricity grew, hotels and industry gradually stopped generating their very own power and relied on the newly constructed power grip instead. Electricity use spread with other businesses after which homes in cities and across America’s rural areas.
As electrical service was installed over the county, reliance upon electricity grew. Refrigeration which was once based on blocks of ice was largely replaced by electric refrigerators after the 1940s. Electrical lighting proved safer than oil lanterns and gas lamps, and America’s reliance upon electricity grew as each new convenience was a necessity. Almost all the electrical power originated in generators run by the 1st electric utilities.

Backup Power

The electrical power grid is definitely susceptible to interruptions due to natural events and accidents. Weather is generally the culprit behind an outage then when harm to the grid is widespread, it could take days or weeks to correct.
Home standby and portable power generation units provide electrical power in the event the utility services are interrupted. They do more than simply supply power in the interests of convenience, they protect homes, families, and property. Today’s modern home relies upon electricity for a number of purposes, and some of those can spell disaster in the event the utility electrical supply is interrupted. A house power generation unit supplies electrical power that is no longer simply a convenience, but has changed into a necessity.

Medical Equipment – Here

People that trust medical equipment can easily live both at home and not in institutions because of the widespread option of reliable electricity. In the event the availability of electrical power is interrupted, the medical equipment fails. Home generators for backup power can provide the needed electrical power and make the gear operating. Generators provide power for short periods until help arrives, or for as long as the outage lasts. Home medical equipment which will run on standby generator or generator power includes oxygen generators, monitors, CPAP machines, and home dialysis equipment, and various types of equipment.

Home Appliances

Within a power outage, home generators supply power for sump pumps to avoid flooding, well pumps to supply water for drinking and sanitation, and refrigerators and freezers to help keep food from spoiling.
Early 20th century homes had outdoor plumbing, passive heating systems, and windows for temperature control. Today, HVAC systems provide climate control to help keep homes warm or cool and provide adequate ventilation and the plumbing from freezing or mold from growing in the event the humidity is too high.
As reliance upon electricity has grown, our power to do without some has decreased proportionally. Home power generation units fill out the space left when power companies are not able to deliver electrical power to homes which need it.

For more info go to: www.BackupHomePower.com

Need More than a 20kw Generator can Provide

Oct 10, 2013 Generators

Need More than a 20kw Generator can Provide? A glance at Larger Units and Who Needs Them

Air-cooled standby generators top out at 20 kilowatts, which is a just 83 amperes at 240 volts. Most new homes have 200-amp service. Normally, most homes avoid the use of the volume of power their service is capable of supplying, and seldom come close―most of the time. In fact, most homes don’t exceed 80 amperes apart from short periods or when large motors on air conditioners or well pumps start. From the 1940s towards the 1970s, 60-ampere service was usual and 100-ampere service became common in the 1970s.

With power management features designed for most residential standby generators, in addition to conservative power use practices, most homes can function comfortably on 20 kilowatts or a lesser amount of standby power.

Higher Power Requirements

Larger homes have higher power requirements. It’s not uncommon to want 300- and 400-amp service in large homes, and the largest luxury homes are now and again provided with even larger electrical service. They have got multiple, high-capacity air conditioners and furnaces, plus general, larger appliances.  Power use exceeding 20 kilowatts could be the normal, everyday level of use within these homes.

Smaller businesses and manufacturing facilities are also higher users of electricity. When it comes to larger facilities, multiple standby generators are often used to produce enough standby electricity just to supply emergency systems which don’t include everyday operational requirements.

Liquid Cooled Generators

Liquid-cooled standby generators use engines comparable to those present in cars. They have a fan-cooled radiator filled up with coolant that’s pumped through the engine to cool it. As they do not count on the ambient air temperature to directly cool the engine, and also, since their air conditioning system is active rather than passive, they’ve less trouble with overheating and gives more reliable operation.

Standby generators of this type can be obtained with as much as 60 kilowatts of power for residential use, and bigger models of up to 150 kilowatts for commercial use. A capacity of 60kW provides approximately 250 amperes of current continuously, enough to maintain most luxury homes operating without the need for judicious using power.

The bigger, commercial standby models will handle the requirements of most commercial facilities and can supply power to restaurants, buildings, apartment buildings, and retail facilities. Facilities that need more power can install multiple units.

Manufacturers

For residential use, Generac Power Systems manufacturers the QuietSource line of home standby power generators. The QuietSource models can be purchased in 22, 27, 36 and 48 kilowatts, enough power for the majority of larger and luxury homes. QuietSource generators include models in 240-volt single-phase,  208-volt three-phase, and 480-volt three-phase standby power.

Generac’s Commercial series of liquid-cooled standby generators include 22 to 150 kilowatt models for business or commercial use and are available in 240, 208, or 480 volt models both in single and three-phase configurations. Models with aluminum or steel enclosures can be obtained.

Briggs & Stratton has three models designed for whole house standby power in 35, 45, and 60 kilowatts to power the biggest of luxury homes throughout a power outage. With this type of power available, you don’t need to forgo any of life’s necessities or conveniences.

Considerations

Homes that count on high-demand electric appliances for example ranges, dryers, water heaters, well pumps, electric heating, and central air conditioners may necessitate more power than an air-cooled standby generator provides without extensive management and careful using of power. These homeowners should think about a more substantial, liquid cooled generator.

Businesses and commercial operations ought to have the reliability and power advantages that larger, liquid-cooled standby generators can provide.

For more information on these great brands, please go to: www.NPSGenerac.com

Uses and Best Fit for Under 14kW Generators

Oct 8, 2013 Generators

Uses and Best Fit for Under 14kW Generators

Generators that leave lower than 14kW of power feel like lightweights, but many can supply power within an outage to keep critical circuits operating and still provide a few conveniences concurrently. Standby generators followed by an automated transfer switch operate automatically throughout an outage to keep your home provided with power, even if you are not home. Portable generators won’t operate automatically, nonetheless they can get the job done when a standby generator is not an alternative.

Fuel Consumption

Supplying fuel for a generator throughout an outage is usually an issue. Finding gasoline or diesel fuel after a widespread outage could possibly be difficult or supplies might be restricted. After Hurricane Sandy, some areas rationed gasoline. Smaller generators use less fuel, and consumption is directly suffering from electrical load.

Standby generators use propane or natural gas and eliminate the necessity for continuous refueling. Some portables can work on propane, and several may use natural gas, propane, or gasoline.

Homes that use LP gas instead of propane must store their fuel within a tank. LP-powered generators from 7kW to 14kW in many cases are well suited for LP gas installations since they use less fuel than larger generators. Expect a fully loaded 7kW generator to utilize about 1.3 gallons of propane an hour, while 20kW might use approximately 2 gallons each hour to produce the equal amount of power.

Homes with Lower Power Requirements

Not every home requires how much power a sizable generator is capable of producing. Many older homes have 100-amp or perhaps 60-amp main service panels, and the most power they can use is already limited. Even newer homes with 200-amp electrical service don’t utilize a whole lot of power.

A 13kW generator can establish 54 amps of current continuously at 240 volts―almost over a 60-amp service, and except for peak periods, it nears the maximum amount of power supplied by having a 100-amp service in several situations. A larger generator is simply unnecessary.

When air conditioning units and other high-voltage, high-current appliances are used, a transfer switch that manages generator power will assure that power hungry appliances receive the power they require.

Mobile Homes

Many mobile homes are made and built for 50 to 60-amp service and they are supplied via an external disconnect mounted on a pole or post outside the ‘recreational vehicle’, along with the utility company meter. Building codes typically have to have a 100-amp service as the minimum, and also the cabling that runs between the disconnect and the camper must accommodate much power. Other jurisdictions allow connection through a 60-amp cord and receptacle.

In either case, the energy needs of mobile homes are generally less than built-in-place homes, and they are good candidates for less than 14kW portable or standby generators that run on LP gas, natural gas, or gasoline. Gasoline storage might be a problem in mobile home communities, making LP or preferable.

Renewable Energy Systems

Solar and wind powered off-the-grid energy systems provide their very own power which gets stored in batteries. They supply enough power for energy-efficient appliances and don’t count on power in the electric utility. In many instances, they may be fully disconnected from the power grid.

Generators designed to operate off grid and operate on LP gas fill in the space if the sun doesn’t shine or even the wind doesn’t blow, and battery levels run low. Typically, these generators produce about 6kW, although larger units can be purchased. Off grid and renewable power systems focus on minimal power use and ecologically friendly operation, making small, energy efficient generators the ideal choice.

To find out more go to: www.GeneratorPowerForLess.com

Why Kohler Generators are a Great Option for Home Standby Units

Oct 3, 2013 Generators

Why Kohler Generators are a good Alternative for Home Standby Units

Kohler entered the power generator industry after WW1 after they began building the Kohler Automatic Power & Light Power Plant in 1920 for usage on farms plus other isolated locations. Back then, the rural power company hadn’t been conceived and the power plant filled a spot that filled an easy-growing dependence on electricity. The generator system was revolutionary for the reason that it started automatically whenever power was needed rather than operating regularly.

During The Second World War, Kohler supplied generators to U.S. troops around the world meant for the war effort. Following the war, they built standby emergency generators for hospitals, businesses and government buildings that needed a reliable way to obtain standby power―at the period an unheard of concept―Kohler had been there with generator items that met the demands of the time.

After their entry in to the generator market greater than 90 years back, Kohler Power Systems continues to be manufacturing and supplying standby generators that work automatically without human intervention.

Kohler Home Standby Generators

Kohler’s home standby generators supply power once the electric utility fails. Combined with a mechanical transfer switch, the units standby 24 hours a day to get started on and run automatically in the event of a power outage.

If the power fails, the generator waits a matter of seconds so that the outage is just not momentary. Then this engine starts and reaches operating speed. The automated transfer switch disconnects from the utility supply and connects to the generator. Electricity is restored to selected circuits or the entire home (with respect to the transfer switch configuration). If the utility line is re-energized, the transfer switch restores utility capacity to your home. The generator runs for the minute for cooling down, then turns off.

Kohler supplies home standby generators in sizes that vary from 8500 watts to 100kW that fulfill the power needs of even most luxurious homes and a lot of businesses.

Automatic Transfer Switches

Standby generators require an automatic transfer switch to work automatically. Kohler designs their automatic transfer switches specifically to work with their standby generators. They have got several different designs to meet the needs of most homes.

The Intelligent Transfer Switch Load Center combines a principal service panel having an automatic transfer switch that also includes an intelligent load-shedding power management system. The indoor model has room for 40 circuit breakers, the outdoor NEMA 3R model has room for 28. This model can replace the main service panel.

Other transfer switches made by Kohler include 100 to 400 amp models with or without load centers and power management capabilities. Models without load centers can manage utility and generator power for the entire home or simply a subpanel, while load center models are built to operate like a subpanel with all the main circuit breaker panel as the source.

Kohler Power Systems Reliability

Kohler has a long reputation for reliable power solutions. Their innovative systems happen to be providing power both at home and around the world since the 1920s, and they also were among the first to provide automatic standby generators. Their property standby generators provide an industry-leading warranty that covers their units for five years or 2000 hours. The generators can operate for days or perhaps weeks if required, and so their models are factory tuned to perform on either LP gas or Propane, driving them to efficient and reliable performers who supply utility quality power when needed.

For more information, please go to: www.Got-Generators.com

Understanding the term Home Standby Generators

Oct 1, 2013 Generators

Understanding the term Home Standby Generators

Residential use generators supply power to homes when the electric utility supply is lost. Utility power interruptions occur on account of weather related events including high winds, ice buildup on wires, wild animal damage, motor vehicle collisions, and damage due to many other acts of nature or man. Home appliances and systems that depend upon electric power cannot function within the outage unless a way to obtain emergency power is available.

Permanent Installation

Standby generators are invariably willing to operate, around the clock, seven days per week. These are permanently wired to the home’s electrical system through an automatic transfer switch, and connected to the home’s natural or LP gas supply pipes. A Natural or LP gas hookup ensures the generator always has a sufficient supply of fuel available and does not require frequent refueling within the extended outage.

Automatic Transfer Switch

Automatic Transfer Switches work alongside the standby generator’s controller. Following the generator starts and is able to accept the electrical load, the automatic transfer switch disconnects the electrical system from your utility supply and connects it to the home standby generator. The change in power from one supply source to the other is automatic and controlled by electronic switches inside the transfer switch. If the electric utility restores power, the transfer switch reconnects the utility supply and disconnects the generator.

Automatic transfer switches are usually made by the generator’s manufacturer to meet the needs of a particular standby unit, given that they work directly with the standby generator’s controller. Additionally, they provide different choices, including power management, with respect to the needs from the consumer.

Some transfer switches install between your utility meter along with the main service panel to produce power to the complete panel. Others install as being a subpanel of the main service panel and just supply selected critical circuits, including pumps, refrigerators, furnaces, and medical equipment.

Operation

Standby generators are automatic, permanently installed equipment that do not require frequent refueling with liquid fuels. They operate without operator intervention, apart from regular, scheduled maintenance. Unlike portable models which have to be connected and started when power is necessary, the standby home generator operates in a completely automatic mode, whether or not the homeowner isn’t present.

Standby power means the generator is able to operate always. When an outage occurs, the generator starts from a short delay, then a transfer switch moves your house onto emergency backup power. It happens quickly and without intervention, but it is possible to find a few seconds when the house is without electric power. Some electronic equipment may need an uninterrupted supply that operates off battery power before standby generator is able to start and connect to the home’s electrical system.

Installation

Installation requires building permits and the assistance of a qualified electrician to setup the transfer switch making the required electrical connections, as well as a plumber in order to connect the generator towards the home’s gas supply. Inspections of the prepared gravel bed or layer of concrete are generally required before installation, along with the finished work after installation. Adherence to National Electrical Codes, Plumbing Codes, National Fire Protection Association Codes, and local ordinances is required.

The location chosen for installation must be sure that exhaust gases will not enter the home and using CO detectors can also be required.

Home standby generators complete when electric utility power becomes unavailable to guarantee the safety of homes, property, and families.

To find out more, go to: www.BackupHomePower.com

Whole House Generators – a look at what really matters

Sep 25, 2013 Generators

Whole Home Generators – a glance at just what it means, and exactly how much power you obtain

Some standby generator packages are referred to as providing “entire home power” which implies they’re able to power everything in your house. The packages more often than not include an automatic transfer switch with power management features

Alone, “entire home power” means that the entire property is given power, however don’t assume all generators are designed for producing enough power to support all appliances and lights at one time.

Home Power Use

The conventional new home in America has a 200-amp service panel with a lot of circuit breakers. In the event the amperage of all of the breakers inside the panel are added up, they could total just as much as 800 amperes, far more than what the panel or perhaps the main breaker are equipped for. If every one of the home’s appliances and lights were switched on, the whole would still not exceed 200 amperes and also the main breaker wouldn’t trip.

Safety and convenience dictate the dimensions of the principle service panel and the number of circuits it supplies. How big the principle breaker is not a good indicator of the amount of power the complete house uses.

Power Management

Managing power takes two forms. Homeowners do their part by switching off nonessential appliances and lights while operating on standby power. What creates a nonessential appliance depends on the specific situation and the convenience of the complete house generator. Power management devices for example load-shedding controllers or digital power management systems prevent backup generator overloads by limiting the number of high-demand appliances that operate as well.

Automatic Transfer Switches

The automatic transfer switch is an essential part with the entire home generator system. Their installation configures them because the gatekeeper for electrical power for your home. During normal operation, they send power from your electric utility to the main service panel. When utility power fails, they disconnect the utility lines from your home and route power from your entire home generator to the main panel.

In order to meet electrical codes, the automated transfer switch current rating inside a entire home power configuration must equal or exceed the principle circuit breaker current rating. A 200-amp main circuit breaker uses a 200-amp or greater automatic transfer switch. By using a smaller switch for entire home power may cause a fire or permanently damage the switch.

Whole Home Generators

Generators are rated in watts (W) or kilowatts (kW), a measure of the work electric power is able to do. Air-cooled generators for entire home power start out with ratings of approximately 8,000 watts (8 kW) and top out at about 20,000 watts (20 kW). Liquid-cooled generators for residential applications offer 20 kilowatts to 65 kilowatts of electric power.

In comparison, 100 amp main circuit breaker are equipped for about 24,000 watts of power and a 200 amp panel about 48,000 watts of power. Take into account that the home never uses the amount of power the principle breaker can handle.

Deciding on a Home Standby Generator

For the majority of applications, it is not necessary or economical to put in a complete house generator able to giving the equal power the principle circuit breaker can handle. Through the use of power management devices and judicious homeowner power use, smaller generators will give the complete house with electric power.

Perform a power audit to discover the most power used at any time. Know what high voltage appliances are necessary and who are not. Finally, go with a backup generator package that will fulfill the power needs in the entire home and rehearse power management devices to regulate the power supplied to high voltage appliances for efficient entire home energy that meets your requirements.

For more info go to: www.BackupHomePower.com

Emergency Generators – A Must for All Residential Homeowners

Sep 20, 2013 Generators

Emergency Generators: Absolutely Essential for All Residential Homeowners

The time when electricity in the house was obviously a luxury convenience is long past. Since the end of the 1940s, just about any existing home in America has been given electric power, and quite a few jurisdictions require complete installation in new homes. Modern homes depend on electricity for heating and cooling, preventing ground water flooding, home alarm systems and refrigeration. Homes in rural areas also use electricity to pump water for consumption, hygiene, and sanitation.

When electric power goes off, these essential systems will no longer function. Basements and crawl spaces can flood from ground-water seepage, refrigerators and freezers slowly warm and food spoils. In subfreezing temperatures, the plumbing will eventually freeze causing broken pipes and the potential of flooding. During extended outages, batteries in home alarm systems will fail. Those who depend on medical equipment may be at increased risk if they do without their life support systems.

Making do without electricity is frequently more than just a headache, it places the home at risk and can threaten the lives of those people who depend on the safety their property provides.

Emergency Generator Protection

It’s unnecessary to live without electric power after an emergency generator is installed.

When utility power fails, an emergency way to obtain power can keep essential circuits operating. The better the generator, the greater with the ability to power. Smaller standby and portable units of 5000 to 7000 kilowatts are able to keep the refrigerator and freezer cold, power a couple of lights, with the sump pump as well as perhaps the furnace if it is needed.

Larger units as much as 14 kilowatts with power management strategies will handle more appliances including well pumps, water heaters, and air conditioning, in addition to more convenience lighting and small appliances or computers.

Air cooled standby units of up to 20,000 watts are available for larger homes or higher appliances. Liquid cooled units of up 60 kilowatts will supply perhaps the most power hungry of homes with sufficient capacity to keep everything running from pool pumps to jacuzzis.

Standby Emergency Generators

Portable generators provides backup power, but they won’t do it automatically. In relation to emergency power for critical home systems, the standby generator fills in if the electric company is unable to deliver power.

Standby emergency generators are permanently installed appliances that work with an automatic transfer switch. The switch selects utility power during normal operation and standby generator power throughout an outage. It reconnects the utility when service is restored. Both air-cooled and liquid-cooled models are available for residential homes, and are powered by natural gas or on LP gas (propane). They are reliable and begin automatically after a power outage without operator intervention to guard the home and family even though the homeowner is away away or at the job a fairly short distance away.

Portable Generators For Emergencies

Portable generators also supply power during emergencies, but have to have the homeowner to hook them up, start them, and manually switch the home to generator power by using a manual transfer switch. They also require a steady diet of fuel. A typical installation includes the manually operated transfer switch that connects with an inlet box and also to the key service panel. The switch supplies power through the main panel or through the generator with a select group of essential circuits. A heavy-duty cord connects the generator on the inlet box.

A less sophisticated method connects appliances on the generator with extension cords. This utilizes homeowners, but operating hard-wired appliances for example the furnace is generally extremely hard.

Emergency generators supply all-important power during emergencies and each home should be built with an emergency source of power.

To find out more info, head to: www.Got-Generators.com

Deciding on Installing Your Home Standby Generator Yourself

Sep 19, 2013 Generators

Put in a Home Standby Generator Yourself: Why/ Why Not?

 
Standby generators communicate with an automatic transfer switch to supply electric power within a power outage. Installation isn’t necessarily a complicated job, nevertheless it does require knowledge beyond the scope of most do-it-yourself books. Handling the task yourself instead of hiring an experienced and qualified installer can stretch your budget, nevertheless it will likely take more time. You will find positives and negatives to handling it as a do it yourself project and hiring an expert.

Installation

Most effective standby generator installation works on the load center coupled with an automatic transfer switch in a single unit. The transfer switch connects with a double-pole breaker in the primary service panel. The circuits the generator will power are disconnected in the primary panel and routed to the new automatic transfer switch where they are linked to new breakers.
Other installations replace the main service panel with a new one which incorporates the automated transfer switch, or perhaps the ATS is installed between your meter along with the existing panel.
Plumbing to extend the home’s gas lines to the standby generator is needed with an assessment of the gas utility meter to be sure it will handle the elevated flow of gas. Or else, the utility will require a brand new meter installation.

Electrical Work

If you are knowledgeable enough to perform the task yourself and will convince the local building inspector that you can handle the job, you may be around the installation. Expertise in the National Electric Code as it pertains to the installation and your service entrance, as well as a well documented policy for installation may help pave the way for a permit to proceed which has a generator installation, but you’ll still have to try everything correctly and pass the inspection.
Failure to feature important codes or making dangerous mistakes might prompt the inspector to require you to hire an electrical contractor after the fact, which will probably run you more cash in the long run. Creating a “No Occupancy” tag slapped on the home as you made too many mistakes can give you away and off to a motel and incur much more expense before troubles are corrected and your generator passes installation.

Plumbing Work

Connection to your home’s gas or LP gas supply lines is necessary. Natural gas lines to the new standby generator are run with black iron pipe, and LP gas uses copper or plastic tubing. You will need the skill to generate leak-free connections and be able to test for leaks following the installation.
Building inspectors shy of householders that wish to accomplish their own gas line plumbing work, and gas utilities feel similarly. The possibility of explosion or suffocation from leaking gas is very high when mistakes are made and gas lines leak. Explosion danger reaches to neighboring homes.

When you should Do-It-Yourself

If you are positive your skills and may receive the building permit, then go ahead and install your standby generator and automatic transfer switch. Follow every one of the manufacturer instructions together with all local building codes. The structure inspector ought to be other people you know throughout the installation and may offer advice and caveats. Should you come across conditions that allow you to deviate plan, call the inspector to ensure the modern plan is acceptable. Above all, never proceed with purchasing materials or starting set up before you have the proper permits.

When you should Employ a Pro

Understand that you’re working with electricity and you will be subjected to dangerous electrical currents. You’ll need to tap into your home’s gas lines and make up a leak-free pipe run and link to the standby generator. Failure in either of the trades may cause severe injury or death. If you aren’t positive about your abilities with proven experience, hire a professional. It’s worth the peace of mind and saving a few dollars isn’t worth losing the life of someone you care about or yourself.

For more information go to: www.GeneratorPowerForLess.com

Generac Generators Updates the 20kw Standby Generator

Sep 17, 2013 Generators

Generac Generators Updates the 20kw Standby Generator to New Model – 6244

Generac Power Systems introduced the updated model 6244, 20kW Guardian Standby Generator using the new Evolution Controller. The favorite package previously sold under model #5875 which included the 200 Amp, Service-Entrance-Rated Smart Switch, an automatic transfer switch. The new type of the Guardian Series backup generators has been available since January in the 2013 International Builder’s Show in Vegas, Nevada.

Generac’s Guardian Series Home Standby Generators work with an automatic transfer switch the signal from supply chance to a house throughout a power outage without homeowner intervention and run on either propane (LP gas) or Gas Main, eliminating the necessity for frequent refueling.

Evolution Controller

The Evolution replaces the Nexus Controller and includes many updated features. The new interface is often a back-lit membrane keypad to demonstrate generator status instantly. Other new features go beyond the cosmetic. The live view screen still shows two lines of text and reports maintenance logs, generator status alerts, and alarms, but new functional features help house owners with better specifics of battery health, as well as alarms for that wall charger, overload, and fuse warnings to distinguish challenges before they become problems.

The new Evolution also supplies a USB port which allows a technician to update the firmware without removing the controller―a far better solution than swapping out your old Nexus controller for just one with updated programming.

Engine Upgrades

The Guardian group of generators uses Generac’s engineered overhead valve industrial engine―the only engine in the industry that was specifically made for use in standby generators. Generac has produced the engines in their standby units better to service and contains improved starting at a wide range of temperatures using the new updated model line. A redesigned fuel system eliminates the choke and contains a standard throttle body.

Guardian generators ship from the factory able to run using gas main. Conversion to LP gas has long been simple and easy and took just moments, but the new design allows conversion without tools and just has a few seconds. It is actually turning a knob.

Entire Home Power

With 20,000 watts of power, the 6244 can run many kitchen appliances including air conditioning. The Smart Switch contains a load-shedding controller which allows high-voltage appliances to operate without overloading the generator. The Smart Switch senses an overload condition and turns off high-voltage loads in order of assigned priority.

Without the additional hardware, the Smart Switch can control two air conditioning. Digging in an electric Management Module core kit allows the addition of another high-voltage device. Fully packed with four Power Management Modules (PMMs) allows the smart switch to manage when using two air conditioning and 4 additional high-voltage, high-current appliances.

Neighborhood Friendly Design

The 20kW 6244 will fit easily into any suburban neighborhood. The all-metal enclosure is powder coat painted to have an attractive appearance made from Galvaaneal steel for a long, corrosion free-life. Just 66db, it’s quieter than many central air conditioning unit units―important to keep the neighbors happy when their power is going along with their windows are open up. Placement is made easy by compliance with National Fire Protection Association codes and regulations for placement at 18 inches from the home.

Generac leads the industry with standby generators for backup home power, and now the Guardian lineup receives a well earned update.

For more info go to: www.NPSGenerac.com

Onan Power Generators

Sep 13, 2013 Generators

Onan Power Generators

Cummins Onan began in 1920 and supplies generators for RVs, boats, commercial, and emergency vehicles, standby power, and portable applications. With previous quality and trust that spans more than 90 years, Cummins Power Generation is a name you can rely on and a product you’ll be able to depend on to offer power whenever and wherever it is needed.

RV Generators

Cummins Onan has RV generators running on gasoline, diesel, or propane (LP gas) in sizes to match even most demanding needs of recreational vehicles, including those with three rooftop ac units.

Diesel generators for RVs range in proportions from 3,200 to 12,500 watts with six models to choose from. These generators exceed the country’s Park Service standards for acceptable noise levels with a specially engineered enclosure, even under full load. Easily accessible for maintenance and self diagnostic capabilities make owning and taking advantage of a diesel RV generator incredibly easy.

Gasoline generators in nine models supply 2800 to 7000 watts of power, including three models that meet California Air Resource Board (CARB) requirements. Onan gasoline generators feature digital power regulation with low noise and vibration, the light little design, exceptional fuel economy, and easy installation.

For SUTs, fifth-wheels {and Type A and C RVs, LP generators provide 2500 to 6500 watts of power. Enclosed mufflers and vibration reducing enclosures keep your generators exceptionally quiet. Additional features include digital voltage regulation and easy access for maintenance.

Marine Generators

Small boats, yachts, and ships have serious power requirements, and Onan Marine Generators step-up towards the plate with sixteen Quiet Diesel generators rated from 5 kilowatts through 99 kilowatts. The QD series is certified to satisfy US EPA requirements where you can meet a world-wide network of distributors and dealers.

QD generators from Cummins are self-monitoring and speak with the craft’s onboard network. The digital display provides user-friendly facts about self diagnostics, engine and alternator operation, and text displays for reports and standing.

The 17kW and greater models can be bought in either single-phase, 120/240-volts, or three-phase units supplying power at 120/208 – 277 volts. Units smaller than 17kW offer single-phase current at 120/240 volts.

Commercial Mobile

Probably the largest type of Onan Generators are are their Commercial Mobile generators.

Fire and rescue applications frequently use Cummins Onan PTO and hydraulic generators who use far less space than comparable diesel generators. Their Protec PTO generators supply 15,000 to 35,000 watts of power, even though the Commercial HG compilation of hydraulic models can generate 6000 to 25,000 watts of power.

Seven Commercial Quiet Diesel designs have rated outputs from 5000 to 12,000 watts. Applications where noise is a lesser amount of a problem are able to use the Commercial Standard Diesel, with 7500, 10,000 and 20,000 watt models. All the diesel generators offer exceptional reliability, reduced vibration, and two year, 2000 hour warranties.

Commercial Quiet Gas propane-powered generators sized from 2500 to 6500 watts supply quality power with reduced noise levels, easy servicing, and digital voltage regulation for lightweight little installations. The Quiet Gas line comes with gasoline-powered generators from 2800 to 7000 watts.

Residential Standby

Residential standby generators supply electricity to homes during a power outage. Onan offers 13 and 20kW air-cooled models to meet the requirements of all homes, and 20kW to 100kW liquid-cooled generators that will supply even most power hungry luxury homes with electrical energy during an outage. Cummins Onan standby generators run on either LP gas (propane) or natural gas.

Standby generators require a mechanical transfer switch, so when associated with a ATS panel from Cummins Power Generation, their standby generators are fully automatic, supplying power and protecting homes even if the homeowner just isn’t present. Cummins Onan standby generators feature digital voltage and frequency regulation to produce utility quality power.

For more info go to: www.Got-Generators.com